Oki LP-1040 Installation Manual page 49

5
6
7
8
Chapter 3 Receive the shipment and set up the Printer in the final position
Enter the date and time.
Press Next.
Enter the IP address and the subnet mask.
Press Restart.
Caution
It takes a few seconds for the restart to to be
initiated. When the printer is restarting, do not
touch the panel buttons or GUI screen.
The screen on the left is displayed after the
Printer has restarted.
Supply the toner referring to the section 8.5.
When the Ready screen is displayed, prepare
the Printer referring to Chapter 4.
3-29
OKI Data Infotech Corporation CONFIDENTIAL