Oki LP-1040 Installation Manual page 43

OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Receive the shipment and set up the Printer in the final position
5
Attach the document table Hook the U-shaped grooves of the document
table to the screws attached previously.
Tilt the document table a little toward you to
hook them easily.
With the screws and the grooves hooked, lift
the front edge of the document table up until it
is perpendicular to the surface attached. Keep
the document table in that position.
Tighten the right and left screws.
However, to allow the document table to be
moved to the right and left, loosen the two
screws one turn from the fully tighten position.
3-23