Oki LP-1040 Installation Manual page 42

3
Prevent the screws from falling
4
Prepare document table installation
5 mm (0.20 inches)
OKI Data Infotech Corporation CONFIDENTIAL
To prevent the screws from falling inside the
Printer, place a sheet of paper or cloth under
the document table installation part, as shown
in the figure below.
Install the two plus socket head machine
screws at the right and left sides of the Printer
frame.
Install the screws so that the space between
the frame and the bearing surface of the
screws is approximately 5 mm.
3-22
Chapter 4 Prepare the Printer