Table of Contents
Advertisement
Race sidebar
Race Start Line and Race Timer information and options are available via the
Sidebar when it is set to Race Start mode.
Menu item and description
[Race Timer]
Displays the countdown time until race start. When the
timer reaches 0 it will begin to count up, indicating how
long it has been since race start.
[Distance To Line]
Displays how far your vessel is from any point of the
start line.
[Line Bias]
Displays how much closer or further away the favoured
endpoint is to the wind in comparison to the other
endpoint.
194
Menu item and description
[Time To Burn]
Displays how much time you have before you need
to navigate towards the start line. A negative value is
Options
shown if you are predicted to be running behind and
Before Start
will not be at the start line at race start.
• Start
• If you are using polars for sail performance then
speed from the polar diagram is used as the assumed
• Timer duration
starting speed through water.
During
• If you are using fixed angles or have nothing set then
Countdown
you can manually set the expected speed or use your
• Sync nearest
current speed by opening the race start line context
minute
menu (long pressing the start line).
• Up 1 minute
[Edit Line]
Allows you to edit the end points of the start line or
• Down 1 minute
clear it. You can ping the port or starboard end points
• Stop & reset
to your current location as well as swap them.
When Counting
Up
• Stop & reset
N/A
Dashboard
N/A
New race start data items are available in the Dashboard app. These can be
customized and displayed alongside the Race Start Line and Race Timer
features. For more information refer to
16.4 Racing mode settings menus
The following settings menus are available in racing mode:
• [Cartography] — For details refer to:
• [Layers] — For details refer to:
• [Depth] — For details refer to:
• [View & Motion] — For details refer to:
p.173 — View & motion settings menu
Options
N/A
• Ping Port end
• Ping Stbd
(starboard)
end
• Swap ends
• Clear
• Done
p.300 — Race start page
p.168 — Cartography settings menu
p.168 — Layers settings menu
p.171 — Depth settings menu
Advertisement
Table of Contents
Troubleshooting
