Alpha Series Sidebar Operations (Lighthouse™ 4 Mfd) - Raymarine ALPHA Operating Instructions Manual

7.3 Alpha Series sidebar operations
(LightHouse™ 4 MFD)
Some Alpha display functions can be invoked remotely when using a
Raymarine® LightHouse™ 4 (version 4.5 or later) multifunction display /
chartplotter connected to the same network as your Alpha display(s). These
functions are split between either the multifunction display / chartplotter's
[Network] page (for configuration-based options) and [Sidebar] menu (for
features often required whilst sailing).
When viewing an application on your multifunction display / chartplotter, you
can swipe from the left edge of the screen to display the [Sidebar] menu.
From there, select [Alpha display] in order to invoke the following functions
remotely:
Note:
The [Display] option and its available sub-options are only available if more
than one Alpha Series display is networked to the same system as your
multifunction display / chartplotter.
54
• [Display] — Indicates the current performance display that is being
operated via the [Sidebar] menu. A different performance display can be
operated by selecting the [Display] option and choosing a different display
from the list shown. Each Alpha Series display is sorted according to the
display group that it has been assigned to.
– [...] — Opens a menu with additional options:
♦ [Rename] — Displays an onscreen keyboard which can be used to edit
the selected Alpha display's name.
♦ [Move up] —Moves the selected Alpha display up within the list by
one position, if multiple Alpha displays are available. This option is
disabled if your Alpha display has reached the top of the display group
that it has been assigned to.
♦ [Move down] — Moves the selected Alpha display down within the list
by one position, if multiple Alpha displays are available. This option is
disabled if your Alpha display has reached the bottom of the display
group that it has been assigned to.
• [Page] — Switches between the selected Alpha display's data pages. Data
pages can be cycled through either using the [<] left option or [>] right
option.
• [Brightness] — Increases or decreases the selected Alpha display's screen
brightness. Brightness can be changed using the [+] increase option or
[–] decrease option. The current screen brightness is indicated by the
[Brightness bar] below the [+] and [–] options.