Clearcruise™ Object Detection (Video Analytics) Overview; Clearcruise Settings (Object Detection / Video Analytics) - Raymarine LIGHTHOUSE 4 Operation Instructions Manual

27.4 ClearCruise™ Object Detection (Video
Analytics) overview
The Object Detection (Video Analytics) features provide audible and
visual alerts when "non-water" objects are identified by connected
M100/M200/M300 Series cameras.
Objects that visually differ from the water will be identified by the camera as
a "non-water" object.
The following features are available with Object detection:
• [Highlight detected objects] — Enables/disables object highlighting, which
automatically identifies and highlights "non-water" objects.
• [Beep on detection] — Enables/disables an audible beep when an object is
detected ([Highlight detected objects] must be enabled)
• [Display estimated range] — Enables/disables display of an object's
estimated range from your vessel ([Highlight detected objects] must be
enabled, and object must be closer than approximately 100 m (~300 ft)).
ClearCruise (Object Detection / Video Analytics, and Augmented Reality)
• Object detection can be particularly useful at night or
visually limiting environments such as storms or fog.
• In the event of an emergency, such as man overboard,
Object detection could be a useful aid that helps to
identify and predict the distance from the MOB.
Note:
ClearCruise's performance is dependent on conditions
and is not a replacement for maintaining a visual watch.

ClearCruise settings (Object Detection / Video Analytics)

Object Detection (Video Analytics) features and settings can be enabled and
disabled in the [ClearCruise] tab in the Video app.
[Video app > Settings > ClearCruise]
355