Table of Contents
Advertisement
5. LIVE 1 (%) — Percentage of used capacity of the live well 1.
6. GREY 1 (%) — Percentage of grey water in grey water tank 1.
7.
BLACK 1 (%) — Percentage of black water in black water tank 1.
8. BLACK 2(%) — Percentage of black water in black water tank 2.
The combined graphical and digital percentage data item shown on the tanks
page is unique to the tanks page and cannot be reproduced on other data
pages. The tank data items can be changed or hidden.
Note:
The number of tanks displayed on the tanks page can only be changed
by performing a factory reset and choosing a different number of tanks at
the start up wizard.
23.11 Bidata and single data pages
The Bidata and single data pages are always available.
1.
Single data page — By default the single data page displays the current
time.
304
2. Bidata page — By default the bidata page displays SOG (Speed Over
Ground) and depth.
The data items on the single data and bidata pages can be customized.
23.12 CZone plug and play
Digital switching pages for CZone® digital switching systems can be set up
automatically in the Dashboard app using the CZone plug and play wizard.
Note:
• The Plug and play process requires a display interface to be present in
the CZone configuration file for Raymarine MFDs.
• Only 1 display interface dipswitch number must be used to represent
all Raymarine MFDs in the system.
• If the CZone configuration file contains only 1 display interface then the
MFD will automatically select that assigned display interface dipswitch
number.
Once the CZone plug and play wizard is completed successfully you will have
access to all of the programmed circuits via the Dashboard app.
Advertisement
Table of Contents
Troubleshooting
