Table of Contents
Advertisement
AIS target status
Lost (No border,
crossed through)
Buddy (Yellow
fill)
Dangerous
(Flashes Red)
Note:
When the MFD is configured as 'First responder' and is connected to STEDs
compatible AIS hardware, Blue Force AIS icons are used to identify other
STEDs equipped vessels. For details refer to:
Chart app - General
Uncertain
(Dashed outline)
Dangerous
and Uncertain
(Dashed outline
and Flashes Red)
ATON off
position (Red
border)
p.280 — Blue Force Tracking
AIS target information
Vessels with AIS transceivers can broadcast programmed vessel information,
which can be displayed in the Chart app.
1.
Selecting an AIS target icon in the Chart app will display an Infobox
containing AIS identification and position information. The Infobox will
close automatically after approximately 5 seconds.
2. The Infobox can be switched on and off for individual targets from the
AIS target context menu. When switched on, the Infobox is always
displayed for the selected target.
3. Full AIS data can be viewed by selecting [View AIS data] from the AIS
target context menu, or by selecting a target from the target list and
selecting [View full target data] from the pop-over menu.
4. The AIS target name can be displayed next to the target icon. AIS
names can be switched on and off from the [AIS Settings] menu: [Menu >
Targets > AIS Settings > AIS names].
149
Advertisement
Table of Contents
Troubleshooting
