Spark Arrestor - Polaris RZR XP Service Manual

6. Install the two mounting bolts. Torque fasteners to
specification.
TORQUE
Tensioner Mounting Bolts:
7 ft-lb (10 Nm)
7. Install the plunger bolt.
specification.
TORQUE
Plunger Bolt:
15 ft-lb (20 Nm)

SPARK ARRESTOR

The spark arrestor should be cleaned after every oil
change to remove accumulated carbon. A plugged spark
arrestor will affect engine performance. Replace a
cracked or damaged spark arrestor before running the
vehicle.
NOTE
The spark arrestor should be cleaned each time the
machine is submerged in water/mud, and after every oil
change.
1. Remove the spark arrestor retaining fasteners
9929419 R02 - 2018-2019 RZR XP / XP 4 Turbo S Service Manual
© Copyright Polaris Industries Inc.
2. Remove the arrestor from the end of the muffler.
3. Use a non-synthetic brush to clean the screen
Torque fastener to
4. Inspect the screen for wear and damage. Replace if
5. Reinstall the spark arrestor. Torque fasteners to
q
.
the arrestor. If necessary, blow debris from the screen
with compressed air.
damaged.
specification.
TORQUE
Spark Arrestor Fasteners:
8 ft-lb (11 Nm)
MAINTENANCE
w
on
2
2.33