Denon DRA-800H Service Manual page 115

1.6. Confirmation items for the video system
See the block diagram fig.VXXth.
Paths to be confirmed Display
fig.V01
1 HDMI pass
V03:HDMI PASS
2 HDMI CEC fig.V02
V04:HDMI CEC
HDMI Audio
fig.A04a
3 (Audio : Stereo
V05:H.AUDIO-Amp
fig.A04b
Receiver)
HDMI Audio
4 fig.V03
V06:H.AUDIO-TV
(Audio : TV)
fig.V04
5 GUI
V07:GUI MENU ON
Settings
Input Source : CBL/SAT
MAIN ZONE : On
ZONE2 : Off
Input Source : CBL/SAT
HDMI Control : On
MAIN ZONE : On
ZONE2 : Off
Input Source : CBL/SAT
HDMI Control : Off
HDMI Audio : Stereo Receiver (if checking the audio
output from Stereo Receiver)
HDMI Audio : TV (if checking the audio output from TV) • HDMI input (PCM) ⇒ HDMI output (audio output from connected TV)
Input Source : CBL/SAT
Setup Menu : On
MAIN ZONE : On
ZONE2 : Off
115
What to confirm
• HDMI input ⇒ HDMI output (MAIN)
( b The input source can be switched to any source except CBL/SAT.)
• Check that the stereo receiver enters standby when the TV is set to Standby via HDMI OUT.
( b The input source can be switched to any source except CBL/SAT.)
• The ARC path can also be checked (check this using the TV input source).
• HDMI input (PCM) ⇒ Speaker output
( b The input source can be switched to any source except CBL/SAT.)
( b The input source can be switched to any source except CBL/SAT.)
• GUI display ⇒ HDMI output.
( b The input source can be switched to any source except CBL/SAT.)