Denon DRA-800H Service Manual page 102

1. Version Display Mode
1.1. Actions
Version information is displayed when the device is started in this mode.
1.2. Starting up
While holding down buttons "SPEAKER" and "STATUS" simultaneously, press the power button to
turn on the power.
then press the "STATUS" button to display the information in section 1.3 on the display.
b The version list is also displayed on GUI while the version is displayed on the display.
1.3. Display Order
Error information(See "1.4. Error display") → q Model destination information → w Serial Number
→ e Firmware Package → r MCU → t MCU 1st Boot Loader → y DSP → u Audio PLD
→ i GUI SFLASH → o PIMGI → Q0 Hybrid GUI → Q1 HEOS Version → Q2 HEOS Build
→ Q3 HEOS Module → Q4 HEOS Configuration → Q5 HEOS Locale → Q6 Restore Version
→ Q7 Ether Mac Address → Q8 WiFi Mac Address → Q9 BT Mac Address
q Model destination information :
DRA-@@@@@ \\\
@ ： Model name (800H)
\ ： Region (E3, E2,E1C, JP)
w Serial Number :
SN%%%***********
% ： SKU code
e Firmware Package :
Package :****
r MCU :
M:*************
t MCU 1st Boot Loader :
Main FBL :**.**
y DSP ROM :
DSP :**.**
u Audio PLD :
A.PLD :********
i GUI SFLASH :
GUI :@@$\****
@ : Model code
$ : Brand code (Non=0, De=1, Mz=2, Mc=3)
\ : Region code (E3=1, E2=2, E1C=5, JP=4, ALL=0)
* : version
o PIMG :
PIMG :********
Q0 Hybrid GUI :
HIMG :********
Q1 HEOS Version :
HEOS Version
"Press "STATUS" button.
*.***.***
Q2 HEOS Build :
HEOS Build
"Press "STATUS" button.
******
Q3 HEOS Module :
HEOS Module
"Press "STATUS" button.
***
Q4 HEOS Config :
HEOS Config
"Press "STATUS" button.
Development
Production
Q5 HEOS Locale :
HEOS Locale
"Press "STATUS" button.
**_**
102
Q6 Restore Version :
RSTR
"Press "STATUS" button.
************
Q7 Ether MAC Address :
*Ether MAC
"Press "STATUS" button.
******-******
Q8 Wi-Fi MAC Address :
*Wi-Fi MAC
"Press "STATUS" button.
******-******
Q9 Bluetooth MAC Address :
*BT MAC Address
"Press "STATUS" button.
******-******