Denon DRA-800H Service Manual page 105

Network stereo receiver
Hide thumbs Also See for DRA-800H:
Table of Contents

Advertisement

2. PANEL / REMOTE LOCK Selection Mode
2.1. Actions
Switch the PANEL LOCK and REMOTE LOCK modes between on and off.
• PANEL LOCK Mode (with Volume)
Disables reception from all keys and encoders on the front panel except the power button (including
the volume).
• PANEL LOCK Mode (without Volume)
Disables reception from all keys and encoders on the front panel except the power button and
volume encoder.
• PANEL LOCK mode is turned off
2.2. Starting up
While holding down buttons "ZONE2 SOURCE" and "TUNER PRESET CH +" simultaneously, press the
power button to turn on the power.
Select the desired mode using the "TUNER PRESET +/-" button, then press the "STATUS" button to
confirm.
2.3. Displaying and Selecting Each Mode
The information shown on the display switches each time the "TUNER PRESET +/-" button is pressed.
Press the "STATUS" button to set the currently displayed mode and restart the device.
The setting with " * " is selected for each mode.
q
FP/VOL LOCK*On
The buttons on the unit and the master volume knob does not function.
w
FP LOCK
On
The buttons on the unit does not function.
e
FP LOCK
Off
The PANEL LOCK mode is turned off.
r
RC LOCK
On
The device cannot be operated by the remote control.
t
RC LOCK
*Off
The REMOTE LOCK mode is turned off.
105

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents