Table of Contents
Advertisement
Touch this symbol to control the LED lights and Decorative lights setting
Note: This function operates independently from the fan settings
LED Light Setting: Touch the lamp symbol once to turn ON and OFF the LED lights.
DECORATIVE Light Setting: Hold the lamp symbol for 2 seconds to enter setting mode to
change the preset lighting program
After entering setting mode alphabet "A." will appear on the display window, to change to other
colors please hold the lamp symbol again for 2 seconds to change to other colors.
To change the brightness of each color hold the lamp symbol for 2 seconds to enter setting
mode and choose the color that you want to change the brightness. To change the brightness,
press the increase or decrease symbol.
Factory Setting for the Decorative Lights:
"A.": Cyan Color
"B.": Red Color
"C.": Green Color
"D.": Blue Color
"E.": White
"F.": Mix Color (Select the red, green and blue LEDs to mix colors according to their brightness
set in previous "B", "C" and "D" selection separately ("+" and "-" buttons do not respond).
"G.": Running Color (Cyan – Red – Green – Blue) Brightness cannot be change in this setting.
NOTE: After the Decorative light mode has been set, it will automatically memorise the setting.
a. To set up delay timer increase the fan speed to 1 or 2 or 3 as required.
b. Touch the timer symbol to begin setting the required time. Both the fan speed number on the
display window and the timer symbol will begin flashing for 5 seconds.
c. Set the required time by touching on the timer icon
d. After the required time is set, the extractor hood will automatically switch back to the fan
setting earlier and the timer ring symbol backlight will start flashing
e. When the preset times has expired, the timer ring symbol backlight will stop approximately 5
seconds later.
f. To disable this function before the preset time expires, touch the fan speed setting symbol to
0. Timer will automatically cut off approximately 5 seconds later.
Note: Touching once on the timer icon will indicate a number 1 on the display window. The timer
is preset from a minimum of 5 minutes to a maximum of 20 minutes where 1 is equivalent to 5
minutes, 2 is 10 minutes, 3 is 15 minutes and 4 is 20 minutes.
8
Advertisement
Table of Contents
