Rinnai RH-KT2959-GBV Operation & Installation Manual page 11

Metal Grease Filter
Warning:
It is important to regularly clean and/or replace the metal grease filters at
appropriate intervals as grease deposits build-up increases the risk of fire. Do not operate the
extractor hood without any grease filters installed.
Components inside the appliance may have sharp edges. It is advisable that you wear
protective gloves.
Note: Kindly note the metal grease filter may fall during removal from the unit and this will result
in damages to both the metal grease filter and any cooker hob below it. Please ensure that you
hold the metal grease filter securely at all times when removing it from the unit.
Removing the Metal Grease Filter
Note: Grease deposits may accumulate at the bottom of the metal grease filter. Hold the metal
grease filter flat to prevent any grease or fats from dripping out of the filter.
(Fig. 1, Fig.1. 1)
 Press the "
start up the extractor hood.
 Press the "
speed to level 1.
ascend automatically till it is fully opened, the
LED lights will light up.
Fig.1
Press the "

fan speed to 0. Press the grease filter locking
clip
same time take hold of the grease filter from
underneath using your other hand. The grease
filter can only be removed when the fan is fully
stopped.
Insert back the grease filter and lock it in place

after washing.
Fig.1.1
 Press Power
the extractor hood after inserting the grease
filter. At this time, the buzzer will buzz for 10
seconds, the glass panel will automatically slide
and descend until it is fully closed.
" Power ON/OFF symbol to
"speed symbol
The glass panel will slide and
" speed symbol to decrease the
and gently pull down the grease filter, at the
ON/OFF Switch button to turn off
to set fan
11