Dimplex DHCH20H Instruction Manual

Dimplex DHCH20H Instruction Manual

2kw ceramic tower heater

Advertisement

Quick Links

INSTRUCTION MANUAL
2kW Ceramic Tower Heater
Model: DHCH20H
For domestic household use only.

Advertisement

Table of Contents
loading

Summary of Contents for Dimplex DHCH20H

  • Page 1 INSTRUCTION MANUAL 2kW Ceramic Tower Heater Model: DHCH20H For domestic household use only.
  • Page 2 IMPORTANT THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE. Note also the information presented on the appliance CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE INJURY AND/ OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY Please read the operating instructions carefully before using your product for the first time and keep them in a safe place.
  • Page 3 • Although this appliance complies with safety standards, we do not recommend its use on deep pile carpets or on long hair type of rugs. • The appliance must be positioned so that the plug is accessible. • If the supply cord is damaged it must be replaced by the manufacturer or service agent or a similarly qualified person in order to avoid a hazard.
  • Page 4 Exposed to the Near water If the power cable weather outdoors wires are frayed or cut Where small children No extension leads or Where the power may be left unattended power boards cable may be damaged On a slope or Where there is risk Where it may be uneven surface...
  • Page 5: Specifications

    Specifications Model no. DHCH20H Power supply 220-240V~, 50Hz Rated power 2000W Heat settings Adjustable Thermostat Oscillation Weight (net) Dimensions (w x d x h) 170 x 165 x 516mm For greater precision, please always refer to the rating label placed on the product.
  • Page 6 Parts Thermostat Switch Handle Power Indicator Light Grille Base...
  • Page 7: Control Panel

    Control Panel Thermostat Switch Fig 1 Fig 2 Fan Only Low Heat High Heat Fan & Oscillation Oscillation - Low Heat Oscillation - High Heat...
  • Page 8: Operation

    Operation 1. Turn the THERMOSTAT switch clockwise, from MIN to MAX. 2. To use the heater without oscillation, turn the SWITCH to the FAN ONLY icon 2. For low heat, position the switch to icon 3 and for high heat, switch to icon 3.
  • Page 9: Maintenance

    Please refer to the warranty card in the box for warranty information. For any troubleshooting advice, please contact the relative Customer Care Centre below. Glen Dimplex Australia Pty Ltd Glen Dimplex New Zealand Ltd 8 Lakeview Drive, 38 Harris Road, East Tamaki,...
  • Page 12 Supplied by Glen Dimplex Australia 8 Lakeview Drive, Scoresby, Victoria, 3179 © Glen Dimplex Australia. All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Glen Dimplex Australia.

Table of Contents