Related Manuals for Dimplex DHCER24E
Summary of Contents for Dimplex DHCER24E
- Page 1 2.4KW CERAMIC HEATER WITH ELECTRONIC CONTROLS DHCER24E User Manual Please read the instructions carefully before using the product and keep this user manual for future reference.
-
Page 2: Product Features
1. PRODUCT FEATURES • 2.4kW heat output • Choice of heat settings • Double overheat protection • Tip over safety protection • Oscillating function • Electronic climate control • LED temperature display • Remote control • 12 month warranty... -
Page 3: Safety Warnings
2. SAFETY WARNINGS • Please operate the heater on a dry even surface. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning the use of the appliance by a person responsible for their safety. -
Page 4: Assembly Instruction
3. ASSEMBLY INSTRUCTION Open the packaging, take the unit out and unscrew the base fixing nut. Insert the base into the bottom of the unit and screw on the base fixing nut. Turn the unit upright and place it on a flat or even surface before use. -
Page 5: Parts Description
4. PARTS DESCRIPTION Touch Sensor Panel Display Window Front Cover Base Inlet Power Switch... -
Page 6: Operating Instructions
5. OPERATING INSTRUCTIONS First, connect the power cord to the correct power supply (220-240V~/50Hz/ 10 amps). 1. Press the power button at the back of the unit to turn it on. You will hear 2 beeps, which indicates the unit is in standby mode. 2. - Page 7 Remote Control • Press the button to turn the unit On/Off. • Press the button to start or stop oscillation. - The oscillation indicator light will illuminate when the swing function is activated. - The oscillation indicator light will be turned off when in fixed operation.
- Page 8 Remote Control – Battery 1. To remove the battery, open the groove at the bottom of the remote (press buckle inwards to pull out the groove) 2. Put battery CR2032 into the groove with flat side to the back of the remote.
-
Page 9: Cleaning And Maintenance
6. CLEANING AND MAINTENANCE Make sure the power switch is turned off and the plug is disconnected from the socket before cleaning or maintenance. Otherwise, it may cause an electric shock. 1. Cleaning the unit’s surface: Clean the surface with a damp cloth (or add some detergent). Do not use corrosive detergent or solvent to clean, such as Petrol/ Turpentine etc. -
Page 10: Specification
G.W. 4.25kg DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste is required to be disposed of separately. Glen Dimplex Australia Pty Ltd Glen Dimplex Australasia Ltd Unit 1, 21 Lionel Road 38 Harris Road...