Related Manuals for Dimplex DHCER20HC
Summary of Contents for Dimplex DHCER20HC
- Page 1 2 IN 1 CERAMIC HEATER AND COOLING FAN INSTRUCTION MANUAL DHCER20HC Please read the following instructions carefully before using the device and keep this user manual for future reference. – 1 –...
- Page 2 WARNING • This appliance may be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
-
Page 3: Product Features
PRODUCT FEATURES • Heat in winter and cool in summer • Improved element design allows better wind flow: - Improves heating efficiency - Room heat up time - Decreases noise levels down to 40dB • PTC ceramic heating element automatically regulates the power used according to the room’s ambient temperature. -
Page 4: Components Description
COMPONENTS DESCRIPTION 1. Remote control receiver 2. Front cover 3. Wind outlet 4. Filter holder 5. Filter 6. Remote control holder 7. Power cord 8. Plastic base 9. Control panel 10. Power switch ASSEMBLY INSTRUCTIONS Securely attach the base to the main ceramic heater/tower fan unit. –... - Page 5 OVERVIEW OF CONTROL AND DISPLAY PANELS Increase desired Control panel buttons heating temperature (in "Temperature Selection" mode.) Increase number of hours (in timer mode). Oscillate/Swing Decrease desired heating temperature (in "Temperature Select Cooling Selection" mode.) mode and fan Decrease number of setting hours (in timer mode).
- Page 6 The indicators below light up to show when the unit is in the following modes: This is the Numerical display. Numerical display shows the current room temperature in degrees Celsius. For more information about setting the temperature, see “setting the desired temperature”. Numerical display will flash, showing the number of hours on the timer setting (adjust with appropriate up and down arrows).
-
Page 7: Operating Functions
OPERATING FUNCTIONS Setting the desired temperature: 1) The temperature shown on the numerical display on the heater is the current temperature. 2) To adjust the desired heating temperature: a. Ensure the heater is in heating mode. Either the should be shown on the control unit display. - Page 8 Notes on oscillation/swing function: In heating mode, when the unit reaches the set temperature, it will stop heating and blowing air. As a result, the oscillation/swing function will also stop. The heating, air movement and oscillation/swing functions will resume if the temperature in the room decreases. Installing the battery into the remote control 1.
-
Page 9: Safety Warnings
SAFETY WARNINGS To avoid dangerous usage and to get the most out of your unit, please read the safety instructions below. Please note the following symbols in the diagram below: Ignoring this instruction may result in severe Warning damage to the unit or your health. Forbidden These actions are prohibited. - Page 10 Be careful of facing the wind outlet directly at Do not pull the wires when unplugging the babies for too long as they may be unable to power cord, as it may damage the wire. voice their discomfort. Instead pull from the head of the plug. Forbidden Forbidden Make sure there are no abnormal items...
-
Page 11: Cleaning And Maintenance
When storing the heater away, ensure it is placed in a dry area. If the unit has been heating, please allow it to cool down before packing away. UNIT SPECIFICATIONS Model DHCER20HC Voltage 220-240V~ Frequency 50Hz... - Page 12 NOTES – 12 –...
- Page 13 Glen Dimplex New Zealand Ltd 38 Harris Road, East Tamaki Auckland, New Zealand P.O. Box 58473, Botany Manukau 2163, New Zealand Phone: 09 274 8265 Fax: 09 274 8472 Email: sales@glendimplex.co.nz Web: www.dimplex.co.nz...