Page 1
FLAME EFFECT CERAMIC HEATER INSTRUCTION MANUAL DHCER20FE Please read the instructions carefully before use. Keep manual for future reference. This product is only suitable for well insulated spaces or occasional use. – 1 – 14064_DHCER20FE Manual_V2.indd 1 7/12/17 4:25 PM...
CONTENTS Safety Warning and Notices Product Features Components Description Product Operation Introduction Maintenance and Cleaning Technical Parameters Warranty SAFETY WARNING AND NOTICES Please pay close attention to the warnings and instructions in this manual for correct operation and to avoid any danger caused by incorrect use. 1.
Page 3
10. Do not disassemble or make changes to the product unless you are authorized by the dealer or producer. 11. Do not touch the plug with wet hands, it may lead to electric shock. 12. Do not put foreign objects into the air inlet or outlet. 13.
heater. 29. Never place any objects inside the device. Product features PRODUCT FEATURES PTC ceramic heating element, changes the power automatically according to the 1. PTC ceramic heating element, changes the power automatically according to the variation in the ambient temperature. variation in the ambient temperature.
Page 5
Control panel Control panel CONTROL PANEL Control panel POWER BUTTON TURN ON/OFF FLAME EFFECT CHANGE HEAT OSCILLATING SETTINGS TURN ON/OFF ECO MODE Display panel Display panel FLAME EFFECT DISPLAY PANEL Display panel OSCILLATING POWER BUTTON SET TEMPERATURE SET TIMER (IN NO. OF HOURS) ECO MODE LOW HEAT SETTING ACTIVATED...
PRODUCT OPERATION INTRODUCTION INSTALLATION METHOD 1. Take the device out of the bubble wrap, including the following three parts; heater, base and remote control. Product Operation introduction 2. Put the heater on a flat surface upside-down (with the base facing up). Connect the base with the heater.
Page 7
d) Fan: turned on. e) Temperature setting: the default temperature setting is 25ºC. f) Fireplace display: turned on, lights up. g) ECO: turned off, lights off. In heating mode, press to shift the power between low and high power level. Control panel Control panel Low power:...
When both the time and temperature are set, the LED display will switch between showing the set temperature and timer setting every 30 seconds. When a timer is not set, it will only show the set temperature. 10. When the heater is turned on or in standby mode, press button to turn on/off the flame effect function, the LED will light up/off accordingly.
TECHNICAL PARAMETERS Model NO. DHCER20FE Voltage 220-240V Frequency 50 Hz Power 2000 W Noise level. ≤50 dB Dimension 260mm x 260mm x 830mm WARRANTY This device comes with a 2 year warranty from the date of purchase. Keep your receipt as proof of purchase date.