Flushing Box - Brother MFC-J2320 Service Manual

Inkjet dcp/mfc

Hide thumbs Also See for MFC-J2320:

Table of Contents

9.40 Flushing Box

(1) Release the two Hooks, lift up the front end of the Flushing box, and remove the

Flushing box.

Flushing box

Assembling Note: If you replace the Flushing box (without replacing the Main PCB

ASSY), reset the flushing count, using the procedure given in

Chapter 4, Section 1.14

"Reset purge and flushing

It is also recommended that the Ink absorber box be replaced and the purge count be

reset as necessary since the purge count may approach the upper limit.

Confidential

Table of Contents