Customizing Destinations (Maintenance Mode 74); Customizing Destinations - Brother MFC-J2320 Service Manual

1.3.27 Customizing Destinations (Maintenance mode 74)

< Function >
This procedure customizes the machine according to settings of the language,
functions, and worker switches.
< Operating Procedure >
(1) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The "Select 74?" appears on the LCD.
(2) Press the Mono Start key to display the current settings on the LCD.
(3) Enter the desired customizing code.
(4) Press the Mono Start key to save the new setting and return the machine to the
initial stage of the maintenance mode.
If the destination is changed, the "PARAMETER INIT", "PLS UPDATE PROG" then
"Please DL ROM" appear on the LCD. Load the latest firmware (refer to
Section 1.3).
(5) Pressing the X key during the above procedure returns the machine to the initial
stage of the maintenance mode without saving the customizing code.
Note: If no keys are pressed for at least one minute with any display state, the machine
automatically returns to the initial stage of the maintenance mode.
< EEPROM Customizing Codes List >
MFC-J2320
MFC-J2720
MFC-J5320DW
MFC-J5520DW
MFC-J5620DW
MFC-J5625DW
MFC-J5720DW
MFC-J5920DW
U.S.A Canada
- -
- -
- -
0101 0102
0001 0002
- -
0001 -
0201 -
5-52
Argentina Chile
- -
- -
- -
- -
0036 0036
- -
- -
- -
Chapter 4,
Brazil
-
-
-
-
0042
-
0042
-
Confidential