Main Board-3 - Sony PS-LX310BT Service Manual

PS-LX310BT
2-6.

MAIN BOARD-3

Note 1: When the MAIN board is replaced, make sure to refer to
"BLUETOOTH CONNECTION CHECKING METHOD" on
page 5 and check the Bluetooth connection.
OK
BT board cable (3P) is not pressed
by the MAIN board.
BT board cable (3P) is pressed
by the MAIN board.
BT board cable (3P)
hole
17
bottom side
MAIN board
rear side
MAIN board
rear side
front side
screw hole
3 Draw the button, jack, port and two
switches out of the five holes.
screw hole
6 MAIN board
rear side
1 Lift up the MAIN board
stand, etc.
2 Remove the MAIN board block
in the direction of the arrow.
hole
4 MAIN board block
Note 2: When installing the MAIN baord block, align
the two screw holes and two holes.
Sony CONFIDENTIAL
For Authorized Servicer
block in the direction of
the arrow.
5 button
SYS SET