Center & Pinion Assy - Sony PS-LX310BT Service Manual

PS-LX310BT
2-13. CENTER & PINION ASSY
Note: Fix the tape, ground wire, BT board cabel (3P)
and BT board cabel (5P) with using the bond
of commercial products.
MAIN board
rear side
BT board
cable (3P)
BT board
cable (5P)
tape
–
front side
OK
Caulking is upward. Caulking is downward.
–
5 Draw the ground wire out of the hole.
23
bond ground wire
–
front side
Turn over.
NG
6 ground wire
–
bottom side
stand, etc.
4 screw
(PTPWH3 8)
4 two screws
(PTPWH3
7 center & pinion assy
Sony CONFIDENTIAL
For Authorized Servicer
1 Peel off the tape with bond.
ground wire
3 Remove the solder.
rear side
BT board cable
(5P)
BT board cable (3P)
2 Peel off the ground wire,
BT board cable (3P) and
BT board cable (5P) with
left side
bond.
8)
SYS SET