Phono Cable; Bt Board - Sony PS-LX310BT Service Manual

PS-LX310BT
2-7.

PHONO CABLE

Note: Fix the phono cable wire with using the bond of commercial
products.
phono cable (for R-ch)
[red] [black]
bond
[white] [black]
phono cable
(for L-ch)
2-8.

BT BOARD

Note 1: When the BT board is replaced, make sure to refer to "BLUE-
TOOTH CONNECTION CHECKING METHOD" on page 5
and check the Bluetooth connection.
stand, etc.
18
bond
rear side
front side
MAIN board
1 Peel off the bond fixing the phono cable
wire, remove the four solders.
bottom side
1 BT board cable (3P)
connector (CN904)
hole
front side
boss
2 BT board cable (5P)
connector (CN903)
3 four screws
(P2.6
5 BT board
hole
hole
boss
boss
left side
stand, etc.
Sony CONFIDENTIAL
For Authorized Servicer
bottom side
rear side
front side
2 phono cable
8)
Note 2: When installing the BT board, align
the three bosses and three holes.
4 Remove the BT board in
the direction of the arrow.
MAIN board
SYS SET