Stylus - Sony PS-LX310BT Service Manual

PS-LX310BT

2-14. STYLUS

1 Install the stylus protective cover to the stylus.
Note: Make sure to install the stylus protective cover
before proceeding with work.
The stylus may injure you or may get damaged.
stylus
3 Pull down the stylus in the direction of the arrow.
stylus
Attach in order from 1 to 3.
Note: Make sure to install the stylus protective cover before proceeding with work.
The stylus may injure you or may get damaged.
2 Insert the hook of the stylus into
the hole of the cartridge body.
stylus (with stylus
protective cover)
24
stylus
– Side view –
2 Support the cartridge body portion
with one hand.
– Side view –
4 Remove the stylus by pulling
down in the direction of the
arrow.
– Side view –
1 Support the cartridge body
portion with one hand.
hole of the cartridge body
– Bottom view –
stylus (with stylus
protective cover)
3 Push up the stylus in the direction of
the arrow until you hear a click.
Sony CONFIDENTIAL
For Authorized Servicer
– Side view –
SYS SET