Table of Contents
Advertisement
PS-2700
2-10. MAIN
GEAR
REMOVAL
2-12, TURNTABLE
SHAFT
BEARING
1, Remove the turntable platter.
1. Remove the turntable shaft.
2. Set the main gear as shown in Fig. 2-16.
2. Remove the nut as shown in Fig. 2-17.
3, Remove the E-ring (E5)
3. Replace the turntable shaft bearing.
4, Replace the main gear.
rotler
sub-gear
4 main lever
Turn the main gear
in direction arrow.
lever (AJ
main gear
Fig. 2-16
Note:
o
Don't forget to install the roller.
©
The roller should
be geared with the slot of the
heart-shaped cam accurately.
o
The
sub-gear and the lever (A) should be moved
smoothly and kept a horizontal motion.
2-11. CENTER
SHAFT
REMOVAL
turntable shaft
grease
(CR-10:
7-662-001-11)
nut
é
|
a
turntable shaft bearing
ce x5
Fig, 2-17
Note:
o
When
installing, lubricate
the turntable
shaft with
grease.
Advertisement
Table of Contents
