How To Identify Your Vehicle - Taylor-Dunn ET-3000 Manual

Introduction

HOW TO IDENTIFY YOUR VEHICLE

This manual applies to vehicles with the same model and serial numbers listed on the front cover. If
the ending serial number is blank, then this manual was for current production vehicles when printed.
These vehicles are designed for driving on smooth surfaces in and around facilities such as industrial
plants, nurseries, institutions, motels, mobile home parks, and resorts. They are not to be driven on
public highways.
This vehicle conforms to requirements for Type E vehicles as described in O.S.H.A. Standard Section
1910.178 (Powered Industrial Trucks) and with all applicable portions of the American National Standard
for Personnel and Burden Carriers (ANSI B56.8).
The locations of the model number are illustrated below:
Note: Serial number can be found in 1 of 3 locations shown below.
Page 6
These vehicles are not designed to be driven on public roads or
highways. They are available in maximum designed speeds ranging
from 6 to 16 mph. Do not exceed the maximum designed speed.
Exceeding the maximum designed speed may result in steering
difficulty, motor damage, and/or loss of control. Do not exceed locally
imposed speed limits. Do not tow at more than 5 mph.
T-48 AC / ET 3000
MB-T48-02