Samsung EHS AE050RXYDEG/EU Manual page 96

7. Electrical installation
2 Arrange the power cable and the communication cable so that they fit in the housing along the edges of the rear
cover.
NOTE
• When connecting the communication cable to the bottom of the Wired Remote Controller, first cut off
the area A.
3 Using two or more screws, firmly affix the rear cover of the remote controller to the wall, and then cut off the grooves
of the front covers for communication and power cables, making sure these cables have reasonable length.
10 mm or more
10 mm or more
50 mm or more
※ B efore fixing the rear cover, secure at least 10 mm
space of upper side, left side, right side, and 50 mm
space of bottom side.
Installer reference guide / Mono tank integrated type
Area A
<When the cable is not concealed>
10 mm or more
Screw hole
Rear cover
8 cm
※ Y ou must fit the screws into the screw holes.
8 cm
<When the cable is concealed>
95