Samsung EHS AE050RXYDEG/EU Manual page 124

8. System configuration
※ AE050RXYDEG, AE080RXYD**, AE120RXYD**, AE160RXYD**
Option
Channel address
Base heater
Operation mode
Snow accumulation
prevention control
Silent mode
Energy saving mode
Defrost Entry
Temperature Offset
WARNING
• Incorrect handling of the thermostat, safety valve or other valves may lead to tank rupture, or plate heat
exchanger damage. When servicing the unit follow instructions carefully:
– Always turn off main power supply when water supply is being shut off.
– Test the free operation of the safety valve regularly by opening the valve ensuring the water flows freely.
– Electrical connection and all servicing of the electrical components should only be carried out by an
authorized electrician.
– Fitting and all servicing of plumbing fixtures should only be carried out by an authorized installer.
– When replacing the thermostat, safety valve or any other valve or part supplied with this unit, use only
approved parts of the same specification.
Installer reference guide / Mono tank integrated type
SEG1 SEG2 SEG3
Main 0 0
Main 0 1
Main 0 2
Main 0 3
Main 0 4
Main 0 5
Main 0 6
SEG4 Function of the option
A U
0 0
0 0
0 1
0 0
0 1
0 0
0 1
0 0
0 1
0 2
0 3
0 4
0 0
0 1
0 0
0 1
0 2
0 3
Remarks
Automatic address setting (default)
Manual address setting (0 to 15)
Enabled (default)
Disabled
Heat Pump (default)
Heating Only
Disabled (default)
Enabled
Manual Silent mode (-3 dB)
Manual Silent mode * 0.9 (-5 dB)
Manual Silent mode * 0.75 (-7 dB)
Manual Silent mode (-3 dB)
Low-noise Silent mode (default)
Disabled (default)
Enabled
Defrost entering temperature
= Default
Defrost entering temperature
= Default+1°C
Defrost entering temperature
= Default+2°C
Defrost entering temperature
= Default+3°C
123