Samsung EHS AE050RXYDEG/EU Manual page 160

8. System configuration
CAUTION
• Per default setting in the field setting value options, this function will not turn off automatically.
• To limit the duration time for forced mode, set the Field Setting Values #3051 = 1 (Yes) and #3052 = 3~30
(x10 min. =30~300min.).
Setting the set temperature
On each screen, press the or button to select a desired mode and then press the the
temperature by pressing the
Outdoor 28.2
°
Zone1
Zone2
Set Set
24
30
.0
.0
°
Heat Heat
NOTE
• You can adjust the desired temperature by 0.1, 0.5, 1 °C. (Default 0.5 °C)
• When the reference temperature to control is Water Outlet, you can set the temperature only for Water
Outlet.
• When the reference temperature to control is Indoor, you set the temperatures for Indoor and Water
Outlet.
• When applying Water Law function (FSV #2093 = 1~4), only the room set temperature can be set via the
wired remote controller, the water law is set via FSV (#2011~#2081).
• Depending on the Reference temperature set for cooling and heating, the controllable temperatures are
restricted for each mode.
Water Outlet
Indoor Temp
Installer reference guide / Mono tank integrated type
or button.
Zone 1
07/30/2022 1:30 PM
Set
DHW
Water
Outlet
Set
45
.0
° °
Economic
07/30/2022 1:30 PM
Current
30
28.2
Water °
.0 Outlet
°
8.3
°
Indoor
Heat
Water outlet
Auto
WL
-
button. You can adjust the set
Zone 1
07/30/2022 1:30 PM
Set Current
30
28.2
Water Water °
Outlet .5 Outlet
°
8.3
°
Indoor
Auto
Water outlet
AUTO
Cool
Heat
Cool & Heat
Water Outlet
Indoor Temp, Water Outlet
159