Alarm Clock; To Set An Alarm - NEC e616 User Manual

Alarm clock

(press "MENU" key
You can use e616 as your alarm clock which rings and vibrates at a specific time.

To Set an Alarm

You can set up to 5 alarm times. You can set a recurring alarm to ring at a specific time on several days of
week.
To
1 Select an alarm entry
2 Set time
3 Set repeat setting
4 Enter pop-up contents
5 Set clock alarm tune
6 Set clock alarm volume
Toolbox
→ →
select "Toolbox" select "Alarm clock")
Do this
Select the alarm clock to set from Alarm 1 to Alarm 5 and
press the Enter key, or press the SK1 (Edit) key.
The alarm setting screen is displayed.
Set time in 24 hour clock, and press the Enter key.
Select one of the following cycles and press the Enter key: Do
not repeat, or Weekly.
Do not repeat indicates the alarm is non-recurring.
Note : If you Disable the alarm entry when Do not repeat is
selected, the alarm goes off in spite of Disable status.
After the alarm goes off, the entry is put in the Off status.
See Enable the set alarm below.
Weekly is used to set days of week. Select one or more days
using the Enter key.
Note : If you Disable the alarm entry when Weekly is selected,
the alarm entry will put in the Enable status after the set
alarm time elapse without making the alarm go off. See
Enable the set alarm below.
Enter contents (up to 32 single-byte characters) to be displayed
in the pop-up window on the set time screen, and press the
Enter key.
Select the tune you want and press the Enter key. You can
hear the tone by selecting the tone name and pressing the SK1
(Start) key.
Select the volume you want and press the Enter key.
-156-