Date And Time - NEC e616 User Manual

To insert the memory card
Always insert/remove the memory card with the handset power off.
• Insert the memory card into the slot until the memory card is fully inserted into the slot, as shown in the
figure below:
Open the memory card slot
To remove the memory card
1 Push in memory card with the tip of your finger into the slot.
The memory card is released from the slot.
2 Carefully pull the memory card out of the slot.
To format the memory card
1 Insert the memory card into the slot.
2 Press the MENU key and select File Manager, and Memory card tool.
3 Select Format mem. card.
4 Follow the instructions on the handset to format the memory card.
During formatting, all the data stored in the memory card is erased.

Date and Time

When using your e616 for the first time, please remember to set the date and time. This will ensure that all of
your e616 functions are accessible. For further instructions, refer to Setting Clock on page 12 and Date and
time on page 144.
Setup
Insert the memory card
-10-
Remove the memory card