To Establish Or Cancel Bluetooth Connection For Registered Devices - NEC e616 User Manual

Item
Timeout settings

To establish or cancel Bluetooth connection for registered devices

Select Bluetooth, then All devices to view the list of registered device names. Selecting All devices will
place the registered devices to standby status. Selecting each registered device name and pressing the
Enter key will establish/cancel the connection between the device and the handset.The connection status of
each device is indicated by the following icon colours:
• ON (Green): A connection between the registered device and the handset is established.
• READY (Yellow): All devices, or the registered device indicated by this icon are in standby status for
Bluetooth connection.
• OFF (Red): There is no connection between the registered device and the handset, and the handset is
not in the standby status, therefore the Bluetooth connection request from the registered devices will be
rejected.
Description
Sets the timeout values.
Standby timer: Sets the timeout value for maintaining the
standby state.
Search timer: Sets the timeout value for searching for other
devices.
Note : Search ends automatically when Search timer time outs
or 20 devices are detected.
Note : The search time may become longer than the value set to
the item above depending on the number of peripheral
devices or the status of communication with the devices.
Pairing timer: Sets the timeout value for maintaining the pairing
standby state.
-125-
Connections