Clock Alarm (M84) - NEC N500i User Manual

Calculator Key Assignment
For calculator function, the keys are assigned different functions. The following shows the key assignment:
Key
Addition (+)
▲
Multiplication (×)
Equals to (=)
SK1 Memory Recall/Memory Cancel (Press twice)
Inversion (±)
Decimal Point (.)
Using the % function, you can calculate (100 + x) % of a figure (e.g. 200 + 5% = 210) and (100 - x) % of a figure (e.g. 200 - 5% = 190).

Clock alarm (M84)

This feature enables you to switch the clock alarm function on/off and to set the time, repetition and alarm tone.
Turning the alarm on/off
☛
8 4
Clock alarm setting
On/Off Turns on or off the alarm.
Set time Sets the time and am/pm (for 12 hour format) at which the alarm will sound.
Set alarm tone Sets the melody to be played when the alarm occurs (see "Sounds (M62)" on page 62).
Alarm repeat Selects alarm repeat for once, daily or day of the week.
Enter alarm text Sets the message (e.g. Wake up!) which is displayed when the alarm occurs (optional).
☛
When all settings are done, SK1 to save the setting.
The selected melody will be played when the alarm occurs if the ringer is turned on based on the current phone mode. If vibration is turned on, you
will be notified of the alarm by vibration.
Even if the phone has been switched off, the phone automatically switches itself on and sounds the alarm or vibrates at the specified time.
You can stop the alarm tone or vibration by pressing any key.
Accessory (M8)
72
Operation
You can select more than one day of the week at the same time.
You can remove the check by highlighting and pressing
Key
Subtraction (–)
▼
Division (÷)
SK2 Memory Store/Memory Addition
Percent (%)
Exit calculator
CLR Delete digit (if held, all clear)
again.
Operation