Setup; Usim Card - NEC e606 Product Manual

Setup

Before you use your handset you will need to carry out the following actions:
• Valid USIM (Universal Subscriber Identity Module) card inserted
• Battery charged
• Set the date and time
This section will guide you through this step by step.

USIM Card

When you become a subscriber to 3, you are issued a USIM card with a security code or PIN (Personal
Identification Number). The USIM card contains your personal subscriber data and must be inserted into your
handset.
If the USIM card is removed then the handset becomes unusable until a valid USIM is inserted. The holder
for the USIM card is located underneath the battery.
Always disconnect the charger and other accessories from your handset before inserting and removing
your USIM card.
To Insert the USIM Card
1 Ensure that the power is off. If the power is on, press and hold the End (On-Off) key until power is off.
2 Remove the battery. (Refer to the illustration on the next page.)
3 Slide the USIM card into the USIM card holder.
4 Replace the battery.
To Remove the USIM Card
1 Ensure that the power is off. If the power is on, press and hold the End (On-Off) key until power is off.
2 Remove the battery. (Refer to the illustration on the next page.)
3 Slide the USIM card out of the USIM card holder.
-4-
Setup