Text Entry - NEC e606 Product Manual

When making a call, the receiver's identity (phone number) can be displayed on your handset's display if you
subscribed to the Connected Line Identity Presentation (COLP) service, and your 3 number will be notified to
the receiver if you have subscribed to the Calling Line Identity Presentation (CLIP). The current subscription
status of these settings can be found and displayed from Settings. (Refer to Settings on page 80 for
details.)
Basic Operations
The basic operations for hiding your number are shown below:
To Hide Your Number When Making a Call (available only when temporary CLIR service is
subscribed)
To
1 Start Settings
2 Display Show My Number
3 Turn off the Show
function.

Text Entry

You can enter characters, numbers and symbols into your handset, for example, when you enter a phone
number to call, add information to the contacts, write text messages or enter Internet address.
The maximum number of characters allowed in an item or a field is defined as the number of single-byte
characters that can be input. When entering double byte characters such as accents (ë, î, ô, etc.) or triple
byte characters such as the Euro symbol (
There are four types of text entry:
• Multitap Text (ABC) Input
• T9® Text Input
• Numeric Input
• Symbol Input
This section describes the procedures for text entry and text editing.
T9® Text Input is covered by the United Kingdom Pat. No. 2238414B, Euro. Pat. No. 0 842 463
(96927260.8) and other patents pending.
Text Entry
Do This
Press the MENU key.
Select Services, Caller ID Service, and Show My Number.
My Number Select Off.
Your 3 number will be hidden when making a call.
), the maximum number of characters will vary accordingly.
-23-