Network Setup - NEC N600i User Manual

No Security
3 Set codes Sets the codes for PIN1, PIN2,
handeset and private PIN.
Activate PIN1:
PIN1 is used to power on your
N600i. Selects Enable or Disable.
New PIN1:
Changes the PIN1 number. Enter
the current PIN, the new PIN (4-8
digits) and then the new PIN again
for confirmation.
New PIN2:
Changes the PIN2 number. Enter
the current PIN, the new PIN (4-8
digits) and then the new PIN again
for confirmation.
Unlock PIN2:
Displays the PIN2 entry screen
when N600i is turned on.
If you enter your PIN incorrectly
three times in a row, the USIM
card is locked. You can unlock it
by using your PIN Unlock Key
(PUK).
New handset code:
Changes the handset code required
to confirm important actions, such
as deleting all Contact list entries.
This requires the Code Number to
prevent accidental mistakes.
To change the handset code, enter
a new code (4 digits), then enter the
new code again for confirmation.
When you buy your N600i, the
Code Number is set to 0000.
New private PIN:
Changes the network password.
Input the current password, the new
password (4-8 digits) and then the
new
confirmation.
Entry of the handset code (4
digits) is required for the first
setting of New private PIN.
You need this password to
change any call restrictions on
your N600i.
password again for

Network setup

☛
Press 7 (or select Network setup) on the User
settings screen.
Network setup allows you to change various settings
related to the mobile phone network
.
No Security
1 Network Selects the network operator (Public
select Land
automatically/manually.
When Automatic is selected, N600i
automatically searches and selects
PLMN with RAT indicator in order of
priority.
When Manual is selected, a list of
valid PLMNs is displayed. Select a
PLMN with RAT indicator from the list.
Your N600i establishes a connection
to that PLMN. If this connection is
unsuccessful, a message requesting
another selection is displayed.
2 Pref. Displays the list of PLMNs saved in
networks the USIM card, updates the PLMN list
with RAT indicator, adds and deletes
PLMN entries
search priority and the entry display
order. USIM list can contain up to 50
PLMN entries. Add, Sort, Replace
and Delete are provided under the
Options menu.
To change the search priority and the
entry display order:
Press SK1 (Move) on PLMN List. On
PLMN Priority, select the PLMN with
RAT indicator to move, move the
cursor to destination and press the
Enter or SK1.
3 i-mode
settings
49
Mobile Network, PLMN)
and changes the