.
Figure 21: Connecting D8128D OctoPOPITs to the D7412GV3
1 - Zonex 1 address
Refer to Address Switches in Section 9.4.4 Setting the OctoPOPIT Switches on page 44 for
information about making these switch settings. Refer to Table 15 on page 44 for information
about setting Switch 5.
For system supervision, do not use looped wire terminals. Break the wire run to provide
supervision of the connections.
Bosch Security Systems, Inc. | 10/10 | F01U143070-03
D9412GV3/D7412GV3 | Operation and Installation Guide | 9.0
2 - Sensor loops
Off-Board Points
47