Multitech RouteFinder RF560VPN Reference Manual page 5

Example 1 –Address Table
Enter the configuration information (e.g., the Default Gateway and other IP addresses used) into the appropriate field
of the Address Table below. Please print this page and use it to fill in your specific RouteFinder information and keep
for future reference. (Example information below is shown to match with the diagram pictured above.)
Network Port connected to the internal
network (LAN on eth0) Site A.
Network Port connected to the external
network (WAN on eth1) Site A
Network Port connected to the internal
network (LAN on eth0) Site B
Network Port connected to the external
network (WAN on eth1) Site B
LAN-to-LAN Application – Site A:
1. Domain name = __________
2. Public Class C = ___.___.___.X
3. Networks & Services > Networks
LAN: ___.___.___.0, 255.255.255.0
RemoteLAN: ___.___.___.0, 255.255.255.0
RemoteWAN_IP: ___.___.___.___, 255.255.255.255
4. Network Setup > Interfaces
Default gateway = ___.___.___.___
Host name = _____________
Eth0 = LAN, ___.___.___.___, 255.255.255.0
Eth1 = WAN, ___.___.___.___, 255.255.255.___
Eth2 = DMZ (don't care)
Multi-Tech Systems, Inc. RF760/660/600VPN Tunnel Examples Reference Guide (S000308D)
IP Address Net Mask
___.___._._ ___ ___.___._
192.168.2.1 255.255.255.0
___.__.___.___ ___.___.___._
204.26.122.103 255.255.255.0
___.___.__._ ___.___.___._
192.168.10.1 255.255.255.0
___.__.___._ ___.___.___._
205.26.122.3 255.255.255.0
LAN-to-LAN Application – Site B:
1. Domain name = __________
2. Public Class C = ___.___.___.X
3. Networks & Services > Networks
LAN: ___.___.___.0, 255.255.255.0
RemoteLAN: ___.___.___.0, 255.255.255.0
RemoteWAN_IP: ___.___.___.___, 255.255.255.255
4. Network Setup > Interfaces
Default gateway = ___.___.___.___
Host name = _____________
Eth0 = LAN, ___.___.___.___, 255.255.255.0
Eth1 = WAN, ___.___.___.___, 255.255.255.___
Eth2 = DMZ (don't care)
Example 1 – Site A
Default Gateway
___.__.___._
204.26.122.1
___.__.___._
204.26.122.1
5