Part B: Connecting To Telephony Service - Multitech FaxFinder FF200 Quick Start Manual

Multi-Tech FaxFinder Quick Start

Part B: Connecting to Telephony Service

The FF200's fax modem can either be connected to a PBX (for
use in PBX Routing Mode) or to a POTS line (for use in POTS
Mode).
Connection for
PBX Routing Mode
Plug one end of the phone
cable into the FaxFinder's LINE
jack and the other into an
available Station Port on the
PBX.
An RJ11-to-RJ11 cable is included with your FaxFinder.
PBX Routing Mode
Line 2 Line 1
Server Installation
Connection for
POTS Mode
Plug one end of the
phone cable into the
FaxFinder's LINE jack
and the other end into
your standard telephone
receptacle.
POTS Mode
POWER
Line 2 Line 1 Ethernet
5Vdc
POWER
Ethernet
5Vdc
10/100
10/100
13