Logging In (I) - Multitech FaxFinder FF200 Quick Start Manual

Multi-Tech FaxFinder Quick Start
Windows NT
a. From the Windows desktop, right-click on "Network
Neighborhood," and select "Properties."
b. In the Network screen, on the "Protocols" tab, select "TCP/IP
Protocol" in the list of Network Protocols. Click "Properties."
c. In the Microsoft Internet Protocol (TCP/IP) Properties
screen, record the existing IP address. Then reset the IP
address to 192.168.2.2.

2. Logging In (I)

a. Bring up a Web browser on your pc. At the browser's
address line, type the default IP address: http://192.168.2.1
and press Enter.
b. The Login screen will appear.
At this point you can be assured that the FaxFinder is
connected to the network.
If the Login screen does not appear, see the
"Troubleshooting" chapter of the Administrator User Guide,
specifically item #1, "What if I can't see the web page for my
FaxFinder?"
c. At the Login screen, enter admin (all lower case) in the
User Name field.
d. Enter admin (all lower case) in the Password field.
e. Click the Login button. The Web Management Home
screen will appear. From this screen, you can access all of
the FaxFinder Server software screens.
Server Installation
17