Table of Contents
Advertisement
10
11
Fig. 8.23
Fig. 8.24
• Scroll through the various menus by
pressing the keys 11 (back) or 13 (for-
ward), until PAr (Parameters menu) ap-
pears on the LCD display (Fig. 8.25).
• Press the 12 key for 1 second to enter the
selected menu.
Fig. 8.25
• Scroll through the various parameters by
pressing the keys 11 (back) or 13 (for-
ward), until P10, which alternates with the
parameter value, appears on the LCD dis-
play (Fig. 8.26).
- 58 -
ADVANCED COMMISSIONING
15
14
13
12
Fig. 8.26
• Press the 12 key for 1 second (Fig. 8.23)
to enter the selected parameter. The dis-
play will show the following (6=60 sec-
onds) (Fig. 8.27).
Fig. 8.27
• It is possible to modify the value of pa-
rameter 10 from 1=10s to 120=1200s by
pressing the 11 or 13 keys (each unit in-
crease or decrease on the display corre-
sponds to 10 seconds).
• Press button 12 (Fig. 8.23) to confirm the
value entered. The display will show the
following (Fig. 8.28) for 5 seconds, then
move up to the next level.
Advertisement
Table of Contents
