Table of Contents
Advertisement
LCD
FUNCTION
Heating set tempera-
ture
(all other symbols are
disabled).
D.H.W. set temperature
(all other symbols are
disabled).
Delay burner ignition
due to system setting
(flashing uu + flashing
temperature).
Boiler
sweep function.
To activate the chim-
ney sweep function,
set "parameter P32=1
... 4". The following is
displayed:
LP = minimum D.H.W.
hP = minimum output in
heating mode
cP = maximum output
in heating mode
dP=maximum D.H.W.
The transition occurs
with buttons 14 (in-
crease) and 11 (de-
crease) D.H.W. tem-
perature.
3 star preheating func-
tion active.
When the symbol
flashes, the function is
in process.
APPLIANCE DESCRIPTION
in
chimney
LCD
FUNCTION
Constantly illuminated:
solar control unit con-
nected.
When the symbol
flashes, the solar circuit
pump is in operation.
- 13 -
Advertisement
Table of Contents
