Rep 2.2 Ela Hou Ope Assembly (4118) - Xerox WorkCentre M20 Service Manual

8. Remove the key plate, Figure 7.
1
Remove key plate.
Figure 7 Key plate removal
9. Remove the E-mail key pad, Figure 8.
1
Remove E-mail key pad.
Figure 8 E-mail key pad removal
Replacement
Replacement is the reverse of the removal procedure.
WorkCentre M20, 4118, FaxCentre 2218 Family

REP 2.2 ELA HOU OPE Assembly (4118)

Parts List on PL 2.15
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
NOTE: This procedure should only be performed on the 4118. For the M20F ELA HOU OPE
assembly repair procedure, go to REP 2.1. For the 2218 ELA HOU OPE assembly repair pro-
cedure, go to REP 2.3.
1. Remove the ELA HOU scanner assembly, perform REP 14.1, steps 1 through 9.
2. Remove the PBA SUB - OPE, Figure 1.
2
Carefully remove the PBA
SUB -OPE.
1
Remove 14 screws.
Figure 1 PBA SUB - OPE removal
December 2006
4-15
WARNING
WARNING
CAUTION
Repairs and Adjustments
REP 2.1, REP 2.2