Rep 5.2 Ela Hou - Adf (4118) - Xerox WorkCentre M20 Service Manual

REP 5.2 ELA HOU - ADF (4118)

Parts List on PL 5.20, PL 5.22, PL 5.24
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
CAUTION
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1. Disconnect the CBF D SUB cable - ADF main, Figure 1.
Figure 1 CBF harness - DSUB
Repairs and Adjustments
REP 5.2
2. Raise the ELA HOU - ADF.
Do not remove the ADF while the ADF is lowered. In the lowered position the counter-
balance springs are compressed and can cause injury when released.
3. Remove the ELA HOU - ADF, Figure 2. Place the ELA HOU - ADF on a solid flat surface.
CBF D SUB cable - ADF
main.
December 2006
4-32
WARNING
2
Tilt the ELA - HOU ADF
forward then remove.
1
Pull up the ELA HOU -
ADF.
Figure 2 ELA HOU - ADF removal
WorkCentre M20, 4118, FaxCentre 2218 Family