Table of Contents
Advertisement
Rear
1
Back cover
Open this cover if cut sheets become jammed.
on page
73,
"Cut Sheet
2
Scanner cover
Open this cover if cut sheets or an ID card becomes jammed.
Scanner Cover" on page
3
Drawer kick connector
Connect the drawer cable.
4
Wire saddle
Pass the USB cable through this saddle to prevent disconnection of the cable.
5
Interface selection switch
Slide the switch to either left or right to switch between network connection mode and USB connection
mode. The default position is the left (network connection mode).
6
DC-IN connector
Connect a DC cable.
7
USB connector (Type B)
Connect a USB cable (Type B).
8
USB connector (Type A)
Connect the optional wireless LAN unit (OT-WL06).
("Opening the MICR Cover, Back Cover, and Scanner Cover"
Jam")
73,
"Cut Sheet
Jam",
"ID Card Does Not Come
Chapter 1 Product Overview
("Opening the MICR Cover, Back Cover, and
Out")
("Connecting to a Host" on page
42)
18
Advertisement
Table of Contents
