Table of Contents
Advertisement
Checking the Nozzles by Test Printing on Cut Sheets
Self-test printing can be used to check product settings. Self-test printing on cut sheets can be used to check for
missing dots and other printing irregularities.
For printing procedure, refer to
If the test print shows that the nozzle check pattern is blurred, it means that ink head cleaning is required.
("Ink Head Cleaning" on page
"Self-Test Printing on Cut Sheets" on page
Firmware version 1.02 ESC/POS
Buffer Capacity
4K bytes (fixed)
Handshaking operation (busy condition)
Receive buffer full (fixed)
Automatic line feed (CR command function)
Disabled
Resident character
Alphanumeric
Power on status
Disabled
Receipt cover open
Auto recoverable error
Remote wakeup
Enabled
Nozzle check pattern
Maintenance information
Thermal head
: 0.000 km
Autocutter
: 1 cut
Inkjet head(nozzle1) : 234 shots
Inkjet head(nozzle1) : 130 shots
MICR head
: 92 sheets
Memory switches
80)
<Normal>
Chapter 2 Setup
57.
<Clogging>
47
Advertisement
Table of Contents
