Epson TM-S9000II-NW Technical Reference Manual page 41

5
Gently press the ink cartridge into the product.
PUSH
6
Close the ink cartridge cover.
Ink charging starts. The
ink the first time ink cartridges are installed in the product.
When ink charging completes, the
Never open any cover of the printer or turn off the printer during ink charging (while the
(POWER) LED is flashing). Doing so will consume a large amount of ink, which may result in the
need to replace the ink cartridges before the completion of charging.
CAUTION
The ink cartridges included in the product package are used for initial charging. The product uses
ink to prepare for printing (ink charging) when the ink cartridges are installed for the first time.
The installing of ink cartridges is now complete.
(POWER) LED flashes during ink charging. It takes up to 4 minutes to charge the
(POWER) LED changes from flashing to on.
Chapter 2 Setup
41