Preparing For Transport - Epson TM-S9000II-NW Technical Reference Manual

Preparing for Transport

Perform the steps below to prepare the product for transport.
1
Turn off the power.
2
Confirm that the
3
Disconnect the DC connector from the product.
4
Remove the roll paper.
5
Remove the ink cartridge.
6
Store the ASF guide and pocket guide.
7
Pack the product so it is supported both from above and below.
Do not transport a used ink cartridge. Doing so may cause the ink to leak.
("Turning the Power Off" on page
(POWER) LED is unlit.
Chapter 5 Handling the Product
71)
83