Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
Description
No parts required
No parts required
Blower mount
Bolt (1/2 x 1-1/2 inches)
Lock washer
Nut (1/2 inch)
Bolt (3/8 x 1-1/4 inches)
Nut (3/8 inch)
Carriage bolt (3/8 x 1-1/4 inches)
Carriage bolt (3/8 x 1 inch)
Idler assembly
Pulley assembly
Pulley assembly
Pulley-plate mount
Flange nut (3/8 inch)
Blower assembly
Belt
Belt cover
Knob
Qty.
–
Prepare the machine.
Remove the discharge chute and belt
–
cover.
1
1
1
1
1
Install the pulley and idler assemblies
(for machines with a cast-iron spindle).
1
1
1
1
1
1
Install the pulley assembly and belt (for
1
machines with an aluminum spindle).
3
1
1
Install the blower assembly, belt, and
belt cover.
1
1
2
Use