Table of Contents
Advertisement
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
No parts required
Main bracket
Top bracket
Bottom bracket plate
Top bracket plate
Carriage bolt (5/16 x 7/8 inch)
Nut (5/16 inch)
Knob
Hinge bracket
Nut (1/4 inch)
Bolt (1/4 x 4-1/4 inches)
Bolt (5/16 x 3 inches)
Nut (5/16 inch)
Carriage bolt (1/4 x 1 inch)
Nut (1/4 inch)
Front-weight kit (sold separately)
Preparing the Machine
1.
Park the machine on a level surface.
2.
Move the motion-control levers to the N
3.
Engage the parking brake.
4.
Shut off the engine, remove the key, and wait for all movement to stop before you leave the operator's
position.
5.
Allow the machine to cool before adjusting, servicing, cleaning, or storing it.
Qty.
–
Prepare the machine.
1
1
1
1
4
Assemble the kit.
3
1
1
1
1
2
2
Mount the kit to the machine.
1
1
1
Install a front-weight kit (if needed).
-L
position.
EUTRAL
OCK
2
Use
Advertisement
Table of Contents
